Templating Tutorial - Getting Started
This tutorial will try to enable you to write your own templates or modify one of the examples to your needs. On this page we develop a basic template for Peering Manager. If you want to dive in further - see the other parts.
Templates are highly individual to each network, so there is no "one size fits all".
The purpose of a template is to translate information stored in Peering Manager into a syntactically and semantically correct router configuration.
There are several design decisions you must take when writing your own template:
- What to put into the template and what to keep out of it.
Sounds trivial, but a router configuration can be complex.
Roughly, there are two ways to approach this:
- Self contained template: There are no references from the template to the "outside" of it. Means that all policies, route maps, lists, etc. referenced in the template are also defined in the template. This does not mean that there is no configuration on the router(s) themselves - just no reference from inside the template to it.
- Template with outside references: Things that rarely change like community lists, route-maps are kept out of the template and configured on the router. The template simply refers to them where needed.
- Which part(s) of Peering Manager to use: You might not need all features of Peering Manager in your template. For example, I did not use BGP Groups. You might only use it to configure BGP sessions and leave all Communities or Policies out. Its all up to you.
This tutorial will give you the building blocks of templates. The actual design and build you must do yourself according to your needs.
We are building the template step by step from the beginning. The following syntax is used in this document:
Todo
This marks tasks you need to do using the web interface of Peering Manager
This goes into your template.
Don't worry - the complete template we are building will be listed at the end.
Building an example template
Peering Manager should manage your peerings - well, it's in the name. So the template suggested here takes care of:
- No conflict with existing configurations on your router(s).
- Adding new peerings: When a peering request comes in, you only will have to
select the AS and IXP where to peer.
Rest is done automatically, including:
- Building and attaching prefix filters (if wanted)
- Setting communities incoming (and outgoing)
- Building a route-map or route-policy or what ever your platform supports for filtering receiving and announcing prefixes.
To achieve these goals lets set a few variables at the beginning of your template - we are prepending every configuration item in our router by a specific string to make sure nothing is overwritten what is already there.
{#- To avoid conflict with prefedined elements,
we prepend everything we define#}
{%- set p="pm-"%}
We also put the platform of the template into a variable so we can refer to it in the template:
{#- We define the type of template for reference #}
{%- set template_type="cisco-ios"%}
{#- We define the type of template for reference #}
{%- set template_type="cisco-iosxr"%}
{#- We define the type of template for reference #}
{%- set template_type="juniper-junos"%}
Platform specialities
All platforms are different and some platforms lack certain features. Peering Manager itself is platform independent. That does not mean that everything you configure inside Peering Manager can be rolled out to every platform.
This overview here will focus on the limits of the platforms featured in the examples of this tutorial.
Cisco IOS XR
The 'modern' Cisco platform. Lots of features and nearly everything can be put into a template. One issue to be aware of are the handling of BGP Communities - Peering Manager has only one type of community and you can simply enter a Large, Extended or Normal value. Cisco IOS XR handles these three differently, so the template must somehow find out the type of a community. This example uses only regular communities, but if you want to use large communities you must be aware of this.
For policies, it is possible to apply one policy inside another, so all
configured policies in Peering Manager can go one-to-one into the template and a
"session policy" can then call each of them.
To check out if the resulting policy is ok, you can use
show rpl route-policy _name_ inline
command.
Cisco IOS
The 'old' Cisco platform - quite limited in features. You can attach only one route-map to each BGP session. So if you have multiple policies applied to various elements, they need to be "flattened" into one route-map. The suggestion here is to keep things simple and try not to use too many features. Also be aware of the ordering of statements, if in doubt, check the configuration produced before you apply it.
Configuration design
For all configs the following design decisions are applied:
- We distinguish between three types of eBGP sessions:
- Customers
- Peers
- Transit
- The policy for announcing prefixes is as follows:
- Customer prefixes are announced to customers, peers, transit (= all)
- Peer prefixes are announced to customers (only)
- Transit prefixes are announced to customers (only)
- When receiving prefixes, BGP Communities are set that control where these prefixes are announced
- When announcing prefixes, existing BGP communities are checked, and either announced or not
- The template developed here takes only care of peers, however, you can easily extend it to handle transit and customers as well.
BGP Communities
The following communities are used in this example:
Announce to | Community |
---|---|
Nobody | 65500:40000 or empty |
Customers | 65500:41000 |
Peers | 65500:42000 |
Transit | 65500:44000 |
If want to combine them, simply set two or more communities.
Question
Why these numbers? I have been using them for years and simply copied them from my router. Cisco allows regular expression parsing of communities and the '4' as the first digit in my case means 'control announcement'.
Todo
Define the communities listed above in Peering Manager. Give them meaningful names like "Announce to Customers" and set their type to ingress (as they are set when receiving prefixes).
Now with the communities defined, we need to put code into our template to generate the configuration statements.
We also build a "delete list" of all communities we are using internally so we can delete them from received prefixes.
!
! Communitiy Lists
!
{#- Generate named lists for all communities #}
{%- for community in communities %}
ip community-list standard {{p}}{{community.slug}}-{{community.type}} permit {{community.value}}
ip community-list standard {{p}}comm-delete permit {{community.value}}
{%-endfor%}
!
Output for our example looks like:
!
! Communitiy Lists
!
ip community-list standard pm-announce-to-nobody-ingress permit 65500:40000
ip community-list standard pm-announce-to-customers-ingress permit 65500:41000
ip community-list standard pm-announce-to-peers-ingress permit 65500:42000
ip community-list standard pm-announce-to-upstream-ingress permit 65500:44000
!
ip community-list standard pm-comm-delete permit 65500:40000
ip community-list standard pm-comm-delete permit 65500:41000
ip community-list standard pm-comm-delete permit 65500:42000
ip community-list standard pm-comm-delete permit 65500:44000
!
! Communitiy Lists
!
{#- Generate named lists for all communities #}
{%- for community in communities %}
!
community-set {{p}}{{community.slug}}-{{community.type}}
{{community.value}}
end-set
{%-endfor%}
!
#
# Community Lists
#
{#- Generate named lists for all communities #}
policy-options {
{%- for community in communities %}
community {{p}}{{community.slug}}-{{community.type}} members [ {{community.value}} ];
{%-endfor%}
community {{p}}comm-delete members [
{%- for community in communities %}
{{community.value}}
{%-endfor%}
];
}
Remark
In practise on a modern router we would use Large Communities. But as some old routers still do not support them, we stick with regular communities for this example.
With the communities defined, we now need to apply them to ASes or IXPs. If you only peer at an IXP (have no transit or cusomer relationships) you can only apply them to the IXP, no need to also apply them to every AS.
Todo
Have an IXP configured in Peering Manager, and apply the "Announcd to Customers" community as ingress BGP community.
Prefix filtering
Peering Manager uses bgpq3 to build prefix filters. You might not want that for every peer, especially if you peer with a route server who, like the DE-CIX route servers, already filter.
To enable filtering for a peering AS, we use a tag.
Todo
Create a tag in peering manager and give it a name like "Filter Prefixes"
In IOS we have to handle IPv4 and IPv6 separately. We create two prefix lists which we later attach to the peering session(s) for tagged ASes. In case we do not want to filter we also create a prefix list allowing everything - this makes the templating for the BGP session easier.
{%- for as in autonomous_systems %}
{%- for tag in as.tags.all() if tag.slug == "filter-prefixes" and as.prefixes %}
{#- If you want prefix filtering for an as, apply a tag #}
!
! Prefix-lists for AS{{as.asn}} - {{as.name}}
!
{%- for thisprefix in as.prefixes.ipv4 %}
ip prefix-list {{p}}from-as{{as.asn}} permit {{thisprefix.prefix}}
{%- if not thisprefix.exact %} le {{thisprefix['less-equal']}}{%-endif%}
{%- endfor %}
!
{%- for thisprefix in as.prefixes.ipv6 %}
ipv6 prefix-list {{p}}from-as{{as.asn}} permit {{thisprefix.prefix}}
{%- if not thisprefix.exact %} le {{thisprefix['less-equal']}}{%-endif%}
{%- endfor %}
!
{%-else%}
{#- no filtering #}
ip prefix-list {{p}}from-as{{as.asn}} permit 0.0.0.0/0 le 32
ipv6 prefix-list {{p}}from-as{{as.asn}} permit ::0/0 le 128
!
{%-endfor%}
{%-endfor%}
This is later attached to the BGP session like this:
...
neighbor {{ session | ip }} prefix-list {{p}}from-as{{as.asn}} in
...
IOS XR has prefix sets in which you can mix IPv4 and IPv6 prefixes. This makes template writing easier. Also, we create a route-policy to check the prefixes and if filtering is not wanted we simply do a policy containing only a pass statement (allowing all).
{%- for as in autonomous_systems %}
{%- for tag in as.tags.all() if tag.slug == "filter-prefixes" and as.prefixes %}
!
! Prefix-list for AS{{as.asn}} - {{as.name}}
!
prefix-set {{p}}from-as{{as.asn}}
# AS{{as.asn}} - {{as.name}}
{%- for thisprefix in as.prefixes.ipv4+as.prefixes.ipv6 %}
{{thisprefix.prefix}}
{%- if not thisprefix.exact %} le {{thisprefix['less-equal']}}{%-endif%}
{%- if not loop.last%},{%-endif%}
{%- endfor %}
end-set
!
route-policy {{p}}prefixes-from-as{{as.asn}}
# AS{{as.asn}} - {{as.name}}
if destination in {{p}}from-as{{as.asn}} then
pass
else
drop
endif
end-policy
!
{%-else%}
{#- Delete old set if still exists #}
no prefix-set {{p}}from-as{{as.asn}}
{#- Generate an empty policy if no filtering is wanted so the reference still works #}
route-policy {{p}}prefixes-from-as{{as.asn}}
pass
end-policy
!
{%-endfor %}
{%-endfor %}
Routing Policies
With Communities and Prefix Lists/Sets in place, we can now define some routing policies and that part of the template which converts them into router configurations.
Here we really have to be very platform specific. In some platforms like IOS XR the template looks very short and easy to understand, while for others like old Cisco IOS we have to make some compromises.
Inside Peering Manager a policy is simply a piece of JSON - but that allows us to put code for multiple platforms into it.
Todo
Add a Routing Policy in Peering Manager with a name like "peering-out". Define it as an Export policy and put the follwing JSON into the Config Context:
{
"cisco-ios": [
{
"match": [
"community pm-announce-to-peers-ingress"
],
"result": "permit"
}
],
"cisco-iosxr": [
"if community matches-any pm-announce-to-peers-ingress then",
" pass",
"else",
" drop",
"endif"
]
}
Using this format allows to put policies for more than one platform into the config context. Of course, if you only have one router platform you can rewrite this to your needs.
We have to do the same for incoming.
Todo
Add a Routing Policy in Peering Manage and name it like "peering-in". Define it as an Import policy and put the following JSON into the Config Context:
{
"cisco-ios": [
{
"set": [
"local-preference 1000"
],
"result": "permit"
}
],
"cisco-iosxr": [
"set local-preference 1000",
"pass"
]
}
Now we define templates for the different platforms.
In IOS we can apply one route-map to each BGP session. So we iterate over all IXPs and all enabled IXP sessions and generate route-maps (one for in, one for out).
Peering Managers filter merge_import_policies
does the work of putting
all the policies (of IXPs, ASes, and sessions) together, see the
documentation for how this is done.
We have to generate one route-map for all policies defined.
- We put an explicit deny clause at the end, as there is no implicit deny when "continue" is used.
- For incoming, we first delete all our own communities and use a continue statement to go on
- Then we add all IXP communities, and also continue
- Unfortunately there is no easy way to add AS communities (yet)
- Then we add all defined policies, one by one:
- "result" goes into the header of the route-map clause
- "set" and "match" statements are simply printed out
- numbering is done automatically, iteration of the outer loop multiplied by 1000
{%- for ixp in internet_exchange_points %}
{%- for session in ixp | sessions %}
{%- if session.enabled %}
! Session with AS{{session.autonomous_system.asn}} ID:{{ session.id }} at {{ixp.name}}
! Put "deny" clause at the end
route-map {{p}}session-as{{session.autonomous_system.asn}}-id{{session.id}}-in deny 65535
! Delete all our own communities incoming at the beginning
route-map {{p}}session-as{{session.autonomous_system.asn}}-id{{session.id}}-in permit 1
set comm-list {{p}}comm-delete delete
continue
!
! Then set all required communities for this IXP using continue
route-map {{p}}session-as{{session.autonomous_system.asn}}-id{{session.id}}-in permit 2
{%-for community in ixp.communities.all() %}
{%-if community.type == "ingress"%}
set community {{community.value}} additive
{%-endif%}
{%-endfor%}
continue
! Then put all the rest "flattened" into clauses
! In: {{session | merge_import_policies | iterate('slug') | join(',') }}
{%-for policy in session | merge_import_policies%}
{%-set outer=loop.index%}
{%- if policy.config_context is iterable %}
{%- for part in policy.config_context %}
{%- if part == template_type%}
{%- for statement in policy.config_context[part] %}
route-map {{p}}session-as{{session.autonomous_system.asn}}-id{{session.id}}-in {{statement.result}} {{outer*1000+loop.index}}
{%-for inner in statement.match%}
match {{inner}}
{%-endfor%}
{%-for inner in statement.set%}
set {{inner}}
{%-endfor%}
{%-endfor%}
{%-endif%}
{%-endfor%}
{%-endif%}
{%-endfor%}
!
! End of IN
!
! Same for Out: "deny" clause at the end
route-map {{p}}session-as{{session.autonomous_system.asn}}-id{{session.id}}-out deny 65535
! Set communities at the beginning
route-map {{p}}session-as{{session.autonomous_system.asn}}-id{{session.id}}-out permit 1
{%-for community in ixp.communities.all() %}
{%-if community.type == "egress"%}
set community {{community.value}} additive
{%-endif%}
{%-endfor%}
continue
!
{%-for policy in session | merge_export_policies%}
! And all the export policies
! Out: {{session | merge_export_policies | iterate('slug') | join(',') }}
{%-set outer=loop.index%}
{%- if policy.config_context is iterable %}
{%- for part in policy.config_context %}
{%- if part == template_type%}
{%- for statement in policy.config_context[part] %}
route-map {{p}}session-as{{session.autonomous_system.asn}}-id{{session.id}}-out {{statement.result}} {{outer*1000+loop.index}}
{%-for inner in statement.match%}
match {{inner}}
{%-endfor%}
{%-for inner in statement.set%}
set {{inner}}
{%-endfor%}
{%-endfor%}
{%-endif%}
{%-endfor%}
{%-endif%}
{%-endfor%}
{%-endif%}
{%-endfor%}
{%-endfor%}
IOS XR allows that route-policies can be applied (called, like a subroutine) inside policies. That allows us to generate separate policies for all elements:
- Export routing policies defined in Peering Manager
- Create ingress and egress policies for ASes
- Create ingress and egress policies for IXPs
- Create ingress and egress policies for IXP sessions. These also call all other ones and will be attached to the BGP session.
- In this example we will skip direct sessions and BGP Groups, but policies can be created here as well.
The IOS XR template to create all configured policies looks like this:
!
! Configured Policies
!
{%- for policy in routing_policies %}
!
route-policy {{p}}{{policy.name}}
{%- if policy.config_context is iterable %}
{%- for part in policy.config_context %}
{%- if part == template_type%}
{%- for statement in policy.config_context[part] %}
{#- Simply dump all statements one after another#}
{{statement}}
{%-endfor%}
{%-endif%}
{%-endfor%}
{%-endif%}
end-policy
{%-endfor%}
For AS policies we also apply communities if there are any configured for an AS. This has to be done last, so it is not removed by the applied policies. Also, the policy which checks the incoming prefixes (or lets every prefix in) is applied.
!
! Route Policies for AS{{as.asn}}
!
{#- Here the order of statements is important - adding communities is last so they do not get removed by a policy #}
route-policy {{p}}as-{{as.asn}}-in
# {{as.name}}
apply {{p}}prefixes-from-as{{as.asn}}
{%- for policy in as | iter_import_policies()%}
apply {{p}}{{policy.name}}
{%-endfor%}
{%-for community in as.communities.all()%}
{%- if community.type == "ingress" %}
set community {{p}}{{community.slug}}-{{community.type}} additive
{%-endif%}
{%-endfor%}
pass
end-policy
!
route-policy {{p}}as-{{as.asn}}-out
# {{as.name}}
{%- for policy in as | iter_export_policies()%}
apply {{p}}{{policy.name}}
{%-endfor%}
{%-for community in as.communities.all()%}
{%- if community.type == "egress" %}
set community {{p}}{{community.slug}}-{{community.type}} additive
{%-endif%}
{%-endfor%}
pass
end-policy
!
{%- endfor %}
!
! Route Policies for AS61438
!
route-policy pm-as-61438-in
# ip-it consult GmbH
apply pm-prefixes-from-as61438
set community pm-announce-to-customers-ingress additive
pass
end-policy
!
route-policy pm-as-61438-out
# ip-it consult GmbH
pass
end-policy
!
The next policies exported are IXP policies, again we also add communities:
!
! Route Policies for IXP {{ixp.name}}
!
route-policy {{p}}ix-{{ixp.slug}}-in
# {{ixp.name}}
{%- for policy in ixp | iter_import_policies()%}
apply {{p}}{{policy.name}}
{%-endfor%}
{%-for community in ixp.communities.all()%}
{%- if community.type == "ingress" %}
set community {{p}}{{community.slug}}-{{community.type}} additive
{%-endif%}
{%-endfor%}
pass
end-policy
!
route-policy {{p}}ix-{{ixp.slug}}-out
# {{ixp.name}}
{%- for policy in ixp | iter_export_policies()%}
apply {{p}}{{policy.name}}
{%-endfor%}
{%-for community in ixp.communities.all()%}
{%- if community.type == "egress" %}
set community {{p}}{{community.slug}}-{{community.type}} additive
{%-endif%}
{%-endfor%}
pass
end-policy
!
{%-endfor%}
None of them will be directly attached to any BGP session. As policies can also defined on a per-session basis, we generate session-policies which then will apply all the previously generated:
!
! IXP Session Policies
!
{%- for ixp in internet_exchange_points %}
{%- for session in ixp | sessions %}
{%- if session.enabled %}
! Session with AS{{session.autonomous_system.asn}} ID:{{ session.id }} at {{ixp.name}}
route-policy {{p}}session-as{{session.autonomous_system.asn}}-id{{session.id}}-in
# {{session.autonomous_system.name}}
apply {{p}}ix-{{ixp.slug}}-in
apply {{p}}as-{{session.autonomous_system.asn}}-in
{%- for policy in session | iter_import_policies()%}
apply {{p}}{{policy.name}}
{%-endfor%}
end-policy
!
route-policy {{p}}session-as{{session.autonomous_system.asn}}-id{{session.id}}-out
# {{session.autonomous_system.name}}
apply {{p}}ix-{{ixp.slug}}-out
apply {{p}}as-{{session.autonomous_system.asn}}-out
{%- for policy in session | iter_export_policies()%}
apply {{p}}{{policy.name}}
{%-endfor%}
end-policy
!
{%-else%}
{#- Session is disabled, remove route policy as well #}
no route-policy {{p}}session-as{{session.autonomous_system.asn}}-id{{session.id}}-in
no route-policy {{p}}session-as{{session.autonomous_system.asn}}-id{{session.id}}-out
{%-endif%}
{%-endfor%}
{%-endfor%}
Please note the order in which policies are applied (this is open for dicussion, feel free to change in your template):
- IXP policy
- AS policy
- Session policy
An exported session policy looks like (in this case there is no session policy applied):
! Session with AS61438 ID:54 at DE-CIX Frankfurt
route-policy pm-session-as61438-id54-in
# ip-it consult GmbH
apply pm-ix-de-cix-frankfurt-in
apply pm-as-61438-in
end-policy
!
route-policy pm-session-as61438-id54-out
# ip-it consult GmbH
apply pm-ix-de-cix-frankfurt-out
apply pm-as-61438-out
end-policy
!
You now might ask where the actual checking of what is announced
takes place as you do not want to flood your peers.
For this, Cisco IOS XR has a command
show rpl route-policy <name> inline
,
applied to the policy above it shows:
route-policy pm-session-as61438-id54-out
# ip-it consult GmbH
# apply pm-as-61438-out
# ip-it consult GmbH
pass
# end-apply pm-as-61438-out
# apply pm-ix-de-cix-frankfurt-out
# DE-CIX Frankfurt
# apply pm-peering-out
if community matches-any (65500:42000) then
pass
else
drop
endif
# end-apply pm-peering-out
pass
# end-apply pm-ix-de-cix-frankfurt-out
end-policy
So if the community for exporting to peers (65500:42000) is not set, policy pm-peering-out takes care that the announcement is dropped.
BGP Sessions
At last we now create the template for the IXP BGP sessions (direct sessions are not hanled in this tutorial).
We again loop over all IXPs and all sessions at this IXP and create peer entries for both IPv4 and IPv6.
Compared to creating the policies this looks rather simple. We add route-maps we have generated above in and out. The prefix-list is also applied. In case the session is disabled the neighbor is removed (alternatively the session can be shut, this is up to you to code).
router bgp {{ local_as.asn }}
no bgp enforce-first-as
{%- for ixp in internet_exchange_points %}
{%- for session in ixp | sessions %}
{%- if session.enabled %}
! AS{{ session.autonomous_system.asn }} - {{ session.autonomous_system.name | safe_string }}
neighbor {{ session | ip }} remote-as {{ session.autonomous_system.asn }}
neighbor {{ session | ip }} description {{ session.autonomous_system.name | safe_string }}
{%- if session.encrypted_password %}
neighbor {{ session | ip }} password encrypted {{ session.encrypted_password | cisco_password }}
{%- elif session.password %}
neighbor {{ session | ip }} password clear {{ session.password }}
{%- endif %}
address-family ipv{{ session | ip_version }} unicast
neighbor {{ session | ip }} activate
neighbor {{ session | ip }} route-map {{p}}session-as{{session.autonomous_system.asn}}-id{{session.id}}-in in
neighbor {{ session | ip }} route-map {{p}}session-as{{session.autonomous_system.asn}}-id{{session.id}}-out out
neighbor {{ session | ip }} prefix-list {{p}}from-as{{session.autonomous_system.asn}} in
neighbor {{ session | ip }} send-community both
neighbor {{ session | ip }} remove-private-as
{%- if session | max_prefix %}
neighbor {{ session | ip }} maximum-prefix {{ session | max_prefix }} 95
{%- endif %}
exit-address-family
{%- else %}
no neighbor {{ session | ip }}
{%-endif%}
{%-endfor%}
{%-endfor%}
Output of one entry looks like this:
! AS61438 - ip-it consult GmbH
neighbor 80.81.194.176 remote-as 61438
neighbor 80.81.194.176 description ip-it consult GmbH
address-family ipv4 unicast
neighbor 80.81.194.176 activate
neighbor 80.81.194.176 route-map pm-session-as61438-id54-in in
neighbor 80.81.194.176 route-map pm-session-as61438-id54-out out
neighbor 80.81.194.176 prefix-list pm-from-as61438 in
neighbor 80.81.194.176 send-community both
neighbor 80.81.194.176 remove-private-as
neighbor 80.81.194.176 maximum-prefix 100 95
exit-address-family
! AS61438 - ip-it consult GmbH
neighbor 2001:7f8::effe:0:1 remote-as 61438
neighbor 2001:7f8::effe:0:1 description ip-it consult GmbH
address-family ipv6 unicast
neighbor 2001:7f8::effe:0:1 activate
neighbor 2001:7f8::effe:0:1 route-map pm-session-as61438-id53-in in
neighbor 2001:7f8::effe:0:1 route-map pm-session-as61438-id53-out out
neighbor 2001:7f8::effe:0:1 prefix-list pm-from-as61438 in
neighbor 2001:7f8::effe:0:1 send-community both
neighbor 2001:7f8::effe:0:1 remove-private-as
neighbor 2001:7f8::effe:0:1 maximum-prefix 100 95
exit-address-family
Compared to creating the policies this looks rather simple. We add route-maps we have generated above in and out. In case the session is disabled the neighbor is removed (alternatively the session can be shut, this is up to you to code).
A few things to note here:
- If you peer with route servers you have to disable enforce-first-as globaly, the template makes sure it is re-enabled for non route server sessions
- The prefix filter is already applied in the route-policy
- If a session is diabled, we remove it. Alternatively you can shut it down (coding is up to you).
router bgp {{ local_as.asn }}
bgp enforce-first-as disable
{%- for ixp in internet_exchange_points %}
{%- for session in ixp | sessions %}
{%- if session.enabled %}
neighbor {{ session | ip }}
remote-as {{ session.autonomous_system.asn }}
description {{ session.autonomous_system.name | safe_string }}
{%- if session.encrypted_password %}
password encrypted {{ session.encrypted_password | cisco_password }}
{%- elif session.password %}
password clear {{ session.password }}
{%- endif %}
{%-if session.is_route_server %}
no enforce-first-as
{%-else%}
enforce-first-as
{%-endif%}
address-family ipv{{ session | ip_version }} unicast
route-policy {{p}}session-as{{session.autonomous_system.asn}}-id{{session.id}}-in in
route-policy {{p}}session-as{{session.autonomous_system.asn}}-id{{session.id}}-out out
send-extended-community-ebgp
send-community-ebgp
remove-private-AS
{%- if session | max_prefix %}
maximum-prefix {{ session | max_prefix }} 95
{%- endif %}
{%- else %}
no neighbor {{ session | ip }}
{%-endif%}
{%-endfor%}
{%-endfor%}
Output of one peer looks like:
neighbor 80.81.194.176
remote-as 61438
description ip-it consult GmbH
enforce-first-as
address-family ipv4 unicast
route-policy pm-session-as61438-id54-in in
route-policy pm-session-as61438-id54-out out
send-extended-community-ebgp
send-community-ebgp
remove-private-AS
maximum-prefix 100 95
neighbor 2001:7f8::effe:0:1
remote-as 61438
description ip-it consult GmbH
enforce-first-as
address-family ipv6 unicast
route-policy session-as61438-id53-in in
route-policy session-as61438-id53-out out
send-extended-community-ebgp
send-community-ebgp
remove-private-AS
maximum-prefix 100 95
Complete Examples
You can find the complete examples built here in the examples section: